Views
2 years ago

Sensys Manual - Ariston

  • Text
  • Instructions
  • Manual
  • Control
  • Sensys
  • Programming
  • Display
  • Parameter
  • Boiler
  • Settings
  • Heating
  • Sensor

GB product description

GB product description Buttons and Display: 1. back button (previous screen) 2. knob 3. OK button (to confirm operation or access main menu) 4. DISPLAY OK Display symbols: - ( ) Summer - ( ) Winter 1 2 3 4 - ( ) OFF, boiler switched off - ( ) Schedule programming - ( ) Manual operation - ( ) Flame present indication - ( ) Desired room temperature - ( Room temperature detected - ( ) Desired room temperature override - ( ) Outdoor temperature - ( ) AUTO function enabled - ( ) HOLIDAY function enabled - ( ) Central heating active - ( ) Domestic hot water active - ( ) Error indication - (COMFORT) Comfort function enabled - (1.3 bar) System pressure - ( ) Flame present 64

product description GB - ( ) Solar heating system active (where present) - ( ) Complete menu: - ( ) Heating settings - ( ) Hot water settings - ( ) System performance - ( ) Display options Symbols only displayed with the solar heating system installed: - ( ) Boiler - ( ) Boiler operating - ( ) Under-floor heating system - ( ) Single-coil indirect cylinder Initial start-up The first time the SENSYS system interface is connected to the boiler, you will be asked to select a few basic settings. First, you will need to select the user interface language. Turn the knob and select the desired language, then press the OK button to confirm. Move on to setting the date and time. Turn the knob to make a selection, press the OK button to confirm your selection, turn the knob to set the value. Press the OK button to confirm. Save the settings by pressing OK. Press the OK button to access the Menu. Use the knob in the centre to scroll through the menu list and select a parameter, then press OK to confirm. - ( ) Double-coil indirect cylinder CAUTION - ( ) Solar-electric indirect cylinder Some parameters are protected with an - ( ) Solar collector access code (safety code) which protects the boiler settings from unauthorised - ( ) Circulation pump use. - ( ) Heat exchanger - ( ) Diverter valve - ( S1) Collector sensor - ( S2) Low indirect cylinder sensor - ( S3) High indirect cylinder sensor - ( S4) Under-floor heating system thermostat - ( ) Indirect cylinder overheating - ( ) Collector overheating - ( ) Anti-frost function - ( ) Anti-Legionnaire’s disease function - ( ) Recooling function - ( ) Digital display format - ( ) Analogue display format - ( ) Configurable device 65

MANUALS