Views
7 months ago

Sensys Manual - Ariston

  • Text
  • Instructions
  • Manual
  • Control
  • Sensys
  • Programming
  • Display
  • Parameter
  • Boiler
  • Settings
  • Heating
  • Sensor

GB heating schedule

GB heating schedule programming Turn the knob and select: - Remaining days if there are any days which have not yet been programmed, then repeat the steps described above. Turn the knob and select: - Change to change any previously programmed periods Turn the knob and select: - Exit to exit schedule programming. Press the OK button to confirm. The display reverts to showing the previous screen. Press the back button " " to return to the main screen. To facilitate schedule programming procedures, configuration can be carried out via: - Guided programming - Pre-set programs Turn the knob and select: Selecting days heating schedule programming - GUIDED PROGRAMMING Press the OK button. Turn the knob and select the zone in which you wish to apply schedule programming. Press the OK button. Turn the knob and select: - Set programming Press the OK button. Now follow the step-by-step instructions which appear on the display from time to time. Setting comfort periods heating schedule programming 74

heating schedule programming GB - PRE-SET PROGRAMS Press the OK button. Turn the knob and select the zone in which you wish to apply schedule programming. Press the OK button. Turn the knob and select: - Set programming Press the OK button. Turn the knob and select among the following: - Family program - No lunch program - Half-day program - Always enabled Press the OK button to confirm. Turn the knob to scroll through the days and the heating program start and end time. Turn the knob and select save, then press the OK button. Press the back button " " to return to the previous screen. Selecting half-day program - PROGRAMMED/MANUAL (this mode can be used to select either programmed or manual zone heating management) Press the OK button. Turn the knob and select the zone to which you wish to apply the setting. Select scheduled or manual programming. Press the OK button. Press the back button " " to return to the previous screen. Simply turn the knob to adjust the temperature. Selecting operating mode for zone 2 75