Nimbus M NET R32 Range (User Manual) EU

Description Domestic hot

Description Domestic hot water time schedule profile 35,0° 60,0° 35,0° 60,0° 0 2 4 6 8 10 12 14 16 18 20 22 24 Fig. 11 Fr 4-JUN 12:30 If the Internal system temperature is configured for producing domestic 20° hot water, the domestic hot water time schedule profile is displayed. Required temperature 21° Domestic hot water heat pump mode Outside air temperature 16° Operation mode 55°C Fig. 12 If there is a domestic hot water heat pump, the product’s operating mode and the set-point temperature of the water are shown. For the meaning of the icons, refer to the paragraph “Complete home page”. 2.6 Stand-by page Room temperature adjustment in programmed mode The operating mode of the zone associated with the device is set to PROGRAMMED (2). During operation in scheduled programming mode, the set room temperature can be changed temporarily. Turn the selector to select the temperature value indicated using the movable cursor near the ring. Press the selector to confirm. The display shows the set temperature. Turn the selector to set the time until which the change must be maintained. Press the selector to confirm. The (3) symbol appears on the display. The system interface will maintain the temperature value until the set time, after which the pre-set room temperature is restored. 10° 5 °C 18:30 11/10/2020 21° ,5 ° 19,0 SALOTTO Fino alle 20:00 30 50% 1,5 bar 3 2 10° 21,0 ° 12:00 Monday 1 March 2021 Fig. 13 Fig. 15 Room temperature adjustment with AUTO function on If the heating hot water temperature does not match the desired value, it can be increased or decreased via the “Heating Settings”. The correction bar will appear on the display. Press the selector to confirm, or press the back button to return to the previous screen without saving. 2.7 Basic functions Manual room temperature adjustment The operating mode of the zone associated with the device is set to MANUAL (1). Turn the selector to select the temperature value indicated on the display using the movable cursor near the ring. Press the selector to confirm. The display shows the set temperature. 2.8 Operation The main page of the system interface can be customised. The main page can be used to check the time, date, operating mode, the set or measured temperatures, the time scheduling and the active energy sources. 10° 18:30 11/10/2020 21° ,5 ° 19,0 SALOTTO 1 5 °C 30 50% 1,5 bar Fig. 14 10 / EN

User Menu 3. User Menu Page 1 – On the home page press the “Menu” button to access the user menu. – The display will show the user menu consisting of two pages. 1 Zones management Time program Consumptions history – Turn the selector to highlight the desired menu. – Press the selector to access the selected menu. – To access the second page, turn the selector and scroll the cursor past the last icon of the first page. Holiday function System operation modes DHW settings Fig. 16 SYMBOLS Zone Time program Description Allows you to check the main information on the operating status of the zones and to set the operating mode of the single zone. Allows you to choose the type of operation: SCHEDULED the system will operate according to the set schedule. Energy Consumption Holiday function Operation mode MANUAL the system will operate in continuous mode Shows the estimated energy consumption (gas and electricity) and their performance over time for the heating, cooling and domestic hot water modes. The holiday function disables the heating during the holiday period and sets the room heating and domestic hot water system to anti-frost protection until the set date. Can be used to select the operating mode: SUMMER domestic hot water production, space heating off. WINTER domestic hot water production and space heating on. HEATING ONLY indirect cylinder heating off (where present). COOLING AND DOMESTIC HOT WATER (if present). COOLING ONLY indirect cylinder heating off (where present). Domestic hot water settings OFF system off, anti-frost function enabled. Can be used to select the desired temperature, the operating mode for domestic hot water production and the thermal sanitisation function of the DHW storage tank (if present). 11 / EN