AristonThermoUK
Views
1 year ago
Flag

Mobis 8 & 9 - UK Manual

  • Text
  • Installation
  • Settings
  • Instructions
  • Air conditioner
  • Portable
  • Ariston
  • Refrigerant
  • Hose
  • Exhaust
  • Appliance
  • Mobis
  • Manual
  • Wwwaristoncom

Installation

Installation PartDescriptionUnit AdaptorExhaust Hose* Window Slider AdaptorWall Exhaust Adaptor A* (only for wall installation)Wall Exhaust Adaptor B(with cap)* (only for wall installation)* Screw and anchor(only for wall installation)* Window Slider A* Window Slider B1 pc1 pc1 pc1 pc1 pc1 pc1 pcOther RegionsQuantity Part Description Quantity4 set ** ***BoltSecurity Bracket and ScrewDrain HoseFoam Seal C (Non-adhesive)Foam Seal A (Adhesive)Foam Seal B (Adhesive)Remote Controllerand Battery1 pc1 set1 pc1 pc2 pc2 pc1 setNOTE: Items with*are optional. Slight variations in design may occur.Window Installation KitStep One: Preparing the Exhaust Hose assemblyPress the exhaust hose into the window slider adaptorand unit adaptor, clamp automatically by elastic bucklesof the adaptors.Step Two: Install the Exhaust hose assembly to the unitPush the Exhaust hose into the airoutlet opening of the unit along thearrow direction.Exhaust hosePress intoPress intoUnit adaptorWindow slideradaptorExhaust hoseassemblyStep Three: Preparing the Adjustable Window Slider1. Depending on the size of your window, adjust the size of thewindow slider.2. If the length of the window requires two window sliders, use the boltto fasten the window sliders once they are adjusted to the properlength.3. For some models, if the length of the window requires three windowsliders(optional), use two bolts to fasten the window sliders once theyare adjusted to proper length.Window slider ABoltsBoltWindow slider BWindow slider A Window slider B Window slider C10

InstallationNote: Once the Exhaust Hose assembly and Adjustable Window Sliderare prepared, choose from one of the following installation methods.Type 1: Hung Window or Sliding Window Installation(optional)Foam seal B(Adhesive type-shorter)Foam seal A(Adhesive type)orFoam seal A(Adhesive type)Foam seal B(Adhesive type-shorter)1.Cut the adhesive foam seal A and B strips to theproper lengths, and attach them to the window sashand frame as shown.Type 2: Wall Installation(optional)1.Cut a 125mm (4.9inch) hole into the wall for the WallExhaust Adaptor B. 2.Secure the Wall Exhaust Adaptor Bto the wall using the four Anchors and Screws provided inthe kit. 3.Connect the Exhaust Hose Assembly(with WallExhaust Adaptor A) to the Wall Exhaust Adaptor B.Wall ExhaustAdaptor BAdaptor capExpansion anchorpositionNote: Cover the hole using theadaptor cap when not in use.Window slider AWindow slider B(if required)Foam seal C(Non-adhesive type)orWindow slider B(if required)Window slider A2.Insert the window slider assembly into the window opening.orFoam seal C(Non-adhesive type)max 120cm or 47 inchmin 30cm or 12 inchNote: To ensure proper function, DO NOT overextend orbend the hose. Make sure that there is no obstacle aroundthe air outlet of the exhaust hose (in the range of 500mm)in order to the exhaust system works properly. All theillustrations in this manual are for explanation purpose only.Your air conditioner may be slightly different. The actualshape shall prevail.3.Cut the non-adhesive foam seal C strip to match the width of thewindow. Insert the seal between the glass and the window frame toprevent air and insects from getting into the room.Security BracketorSecurityBracket2 Screws2 Screws4.If desired, install the security bracket with 2 screws as shown.or5.Insert the window slider adaptor into the hole of the window slider.11

MANUALS

Search