USER’S MANUAL The installation and first ignition of the boiler must be performed by qualified Gas Safe Registered engineer in compliance with Gas Safety (instillation & use) regulations and all other national regulations regarding installation, and in conformity with any requirements established by local authorities and public health organisations. After the boiler has been installed, the installer must ensure that the end user receives the declaration of conformity and the operating manual, and should provide all necessary information as to how the boiler and the safety devices should be handled. This appliance is designed to produce hot water for domestic use (combi version). It should be connected to a heating system and a domestic hot water system, both of which must be compatible with its performance and power levels. The use of the appliance for purposes other than those specified is strictly forbidden. The manufacturer cannot be held responsible for any damage caused by improper, incorrect and unreasonable use of the appliance or by the failure to comply with the instructions given in this manual. Installation, maintenance and all other interventions must be carried out in full conformity with the governing legal regulations and the instructions provided by the manufacturer. Incorrect installation can harm persons, animals and possessions; the manufacturing company shall not be held responsible for any damage caused as a result. In the event of any maintenance or other structural work in the immediate vicinity of the flue gas exhaust devices and their accessories (chimney), switch the appliance off. When the work has been completed, ask a suitably qualified and competent engineer to check the conformity of the flue gas exhaust devices and their accessories (chimney) with the gas regulations. When the work has been completed, ask a qualified technician to check the efficiency of the ducting and the devices. If the boiler should be out of use for a prolonged period, it is recommended that the electrical power supply be disconnected and that the external gas cock be closed. If low temperatures are expected, the boiler and system pipe work should be drained in order to prevent frost damage. Ensure the boiler is switched off before cleaning any exterior parts of the appliance. Do not allow children or inexperienced persons to use the appliance without supervision. Ariston is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and commissioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimise safety, efficiency and performance. Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For more information visit www.benchmark.org.uk. The Benchmark commissioning checklist, which can be found at the back of the installation instructions, must be completed in full by the installer and be left with the boiler or be made available upon request by any attending Ariston representative. UKCA labelling The UKCA mark guarantee that the appliance conform to the following UK regulations: - Gas Appliances Regulation (Regulation (EU) 2016/426 as brought into GB law and amended) and the Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018 (S.I. 2018 No. 389, as amended) - The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019 (S.I. 2019 No. 539, as amended) - BED (Boiler Efficiency Directive) - only art.7 ( 2), art.8 and annex Ill, IV, V - Electrical Equipment (Safety) Regulations 2016 (S.I. 2016 No 1101, as amended) - Electromagnetic Compatibility Regulations 2016 - Radio Equipment Regulations 2017 (S.I. 2017 No. 1206, as amended) (S.I. 2016 No. 1091, as amended) - The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S.I. 2012 No. 3031, as amended). CE labelling The CE mark guarantees that the appliance conforms to the following directives: - 2016/426/EU relating to gas appliances - 2014/30/EU relating to electromagnetic compatibility - 92/42/CEE relating to energy efficiency - 2014/35/EU relating to electrical safety - 2009/125/CE Energy related Products - 813/2013 Commission regulation (EU) - 2014/53/EU RED (Radio Equipment Directive) / 4 420011270801 - Rev.01 - 072024
USER’S MANUAL CONTROL PANNEL 26/10/21 16:18 10° 20,5° 3 00 02 04 06 08 10 12 14 16 18 20 22 24 40° 1,5 bar 70° COMFORT AUTO Central Heating 1 2 3 4 5 6 7 8 9 10 11 a b b c Legend: 1. Display 2. WIFI button (enable / disable / configure) 3. Domestic Hot Water adjustment button +/- 4. MODE button (Operation mode selection summer/winter) 5. COMFORT button 6. ON/OFF button 7. Auto button (To activate Thermoregulation) 8. RESET button 9. Heating temperature adjustument button +/- 10. Keylock 11. Led Blue - Flame presence Programming key a. Esc button (Back) b. Programming keys c. Ok button programming key User’s Manual / 5
Loading...
Loading...
USER’S MANUAL The installation and first ignition of the boiler must be performed by qualified Gas Safe Registered engineer in compliance with Gas Safety (instillation & use) regulations and all other national regulations regarding installation, and in conformity with any requirements established by local authorities and public health organisations. After the boiler has been installed, the installer must ensure that the end user receives the declaration of conformity and the operating manual, and should provide all necessary information as to how the boiler and the safety devices should be handled. This appliance is designed to produce hot water for domestic use (combi version). It should be connected to a heating system and a domestic hot water system, both of which must be compatible with its performance and power levels. The use of the appliance for purposes other than those specified is strictly forbidden. The manufacturer cannot be held responsible for any damage caused by improper, incorrect and unreasonable use of the appliance or by the failure to comply with the instructions given in this manual. Installation, maintenance and all other interventions must be carried out in full conformity with the governing legal regulations and the instructions provided by the manufacturer. Incorrect installation can harm persons, animals and possessions; the manufacturing company shall not be held responsible for any damage caused as a result. In the event of any maintenance or other structural work in the immediate vicinity of the flue gas exhaust devices and their accessories (chimney), switch the appliance off. When the work has been completed, ask a suitably qualified and competent engineer to check the conformity of the flue gas exhaust devices and their accessories (chimney) with the gas regulations. When the work has been completed, ask a qualified technician to check the efficiency of the ducting and the devices. If the boiler should be out of use for a prolonged period, it is recommended that the electrical power supply be disconnected and that the external gas cock be closed. If low temperatures are expected, the boiler and system pipe work should be drained in order to prevent frost damage. Ensure the boiler is switched off before cleaning any exterior parts of the appliance. Do not allow children or inexperienced persons to use the appliance without supervision. Ariston is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and commissioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimise safety, efficiency and performance. Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For more information visit www.benchmark.org.uk. The Benchmark commissioning checklist, which can be found at the back of the installation instructions, must be completed in full by the installer and be left with the boiler or be made available upon request by any attending Ariston representative. UKCA labelling The UKCA mark guarantee that the appliance conform to the following UK regulations: - Gas Appliances Regulation (Regulation (EU) 2016/426 as brought into GB law and amended) and the Gas Appliances (Enforcement) and Miscellaneous Amendment Regulations 2018 (S.I. 2018 No. 389, as amended) - The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019 (S.I. 2019 No. 539, as amended) - BED (Boiler Efficiency Directive) - only art.7 ( 2), art.8 and annex Ill, IV, V - Electrical Equipment (Safety) Regulations 2016 (S.I. 2016 No 1101, as amended) - Electromagnetic Compatibility Regulations 2016 - Radio Equipment Regulations 2017 (S.I. 2017 No. 1206, as amended) (S.I. 2016 No. 1091, as amended) - The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (S.I. 2012 No. 3031, as amended). CE labelling The CE mark guarantees that the appliance conforms to the following directives: - 2016/426/EU relating to gas appliances - 2014/30/EU relating to electromagnetic compatibility - 92/42/CEE relating to energy efficiency - 2014/35/EU relating to electrical safety - 2009/125/CE Energy related Products - 813/2013 Commission regulation (EU) - 2014/53/EU RED (Radio Equipment Directive) / 4 420011270801 - Rev.01 - 072024
USER’S MANUAL CONTROL PANNEL 26/10/21 16:18 10° 20,5° 3 00 02 04 06 08 10 12 14 16 18 20 22 24 40° 1,5 bar 70° COMFORT AUTO Central Heating 1 2 3 4 5 6 7 8 9 10 11 a b b c Legend: 1. Display 2. WIFI button (enable / disable / configure) 3. Domestic Hot Water adjustment button +/- 4. MODE button (Operation mode selection summer/winter) 5. COMFORT button 6. ON/OFF button 7. Auto button (To activate Thermoregulation) 8. RESET button 9. Heating temperature adjustument button +/- 10. Keylock 11. Led Blue - Flame presence Programming key a. Esc button (Back) b. Programming keys c. Ok button programming key User’s Manual / 5
Loading...
Loading...
CATALOGUE
PRODUCT BROCHURES
DATASHEETS
MANUALS
MANUALS (DISCONTINUED)
PLANNER MANUALS
CASE STUDIES