Genus ONE+ WiFi User Manual

Ariston Genus ONE+ WiFi User Manual

USER’S MANUAL DOMESTIC

USER’S MANUAL DOMESTIC HOT WATER SETTINGS To access the domestic hot water settings, press the OK button. Press the programming key to select: - DHW settings CH Settings DHW Settings Connectivity Settings Screen Settings Press the OK button. The display screen shows: - DHW comfort Setpoint Temp - Time program - NOT ACTIVE - Comfort function Selecting hot water settings Press the programming key to select: - DHW comfort Setpoint Temp Press the OK button twice. Press the programming key to select the desired domestic hot water temperature. Press the OK button to confirm. Press the ESC button to return to the previous screen. COMFORT FUNCTION The comfort function can be used to reduce the wait time when a request for domestic hot water is made. Press the programming key to select: - Comfort Press the OK button. Press the programming key to select: - Disabled - Timed (can be used to keep the secondary exchanger hot during periods of boiler inactivity this increasing wellbeing - 30 minutes) - Always enabled Disabled Time Based Always Active Selecting timed Comfort mode SPECIAL FUNCTIONS To set special function programming, press the OK button. Press the programming key to select: - CH Setting Press the OK button. Press the programming key to select: - Holiday function - Thermoregulation Press the OK button to confirm your selection. - HOLIDAY FUNCTION The holiday function disables heating during the holiday period. Press the OK button Press the programming key to select: - ON (activates the function) - OFF (deactivates the function) Press the OK button.. If you select ON,, press the programming key to set the date on which you are due to return home. This will allow the system interface to resume operation - in the mode set previously - on the set date. Press the OK button to save the settings; the display reverts to showing the previous screen. The “ ” icon appears on the active sources screen when the holiday function is enabled. - THERMOREGULATION (AUTO FUNCTION) The AUTO function automatically sets the boiler operating regime in accordance with the installation type and the environmental conditions. The temperature adjustment of a building consists of maintaining the indoor temperature at a constant level while the temperature outside changes. Press the OK button. Press the programming key to select: - ON (activates the function) - OFF (deactivates the function) Press the OK button to save the settings; the display reverts to showing the previous screen. If the heating hot water temperature does not match the desired value, it can be increased or decreased using the set heating temperature parameter. The correction bar appears on the display. The “AUTO ” icon appears on the display. Press the ESC button to return to the main screen. 01/12/21 11:40 02° 40° 1,5 bar 70° AUTO C. Heating active AUTO Function active / 18 420011270801 - Rev.01 - 072024

USER’S MANUAL WIFI CONFIGURATION - CONNECTIVITY SETTING At the end of the commissioning operations, the request to activate the ARISTON NET service appears on the display. Press the OK button to continue the procedure, follow the on-screen instructions. When NO is pressed, the display asks if the configuration message should be repeated. Select OK or NO. Network configuration can be accessed from the User Menu. Connectivity settings The product can be managed and controlled via App NO OK Discover Ariston Net services! To activate the Remote Control of the boiler refer to the ARISTON NET quick start guide in the box. Access to the USER’S MENU Press the programming key - Connectivity Settings to select: CH Settings DHW Settings Connectivity Settings Screen Settings Press the OK button. Налаштування зв’язку Перш ніж продовжити, перевірте, чи доступна послуга встановлення зв’язку у вашій країні OK Press the OK button. The dispaly shows the Connettivity Settings menu Connectivity Settings ON/OFF Wi-Fi Network Note: The “Network configuration” submenu is displayed only the WI-FI network is set to ON. Network configuration Note: The procedure will delete the Wi-Fi password if already connected. The procedure must be repeted to connect the boiler to internet OK OK Activation/Deactivation Wi-Fi Network of the system. Press the programming key to select: The procedure permits to create Wifi Access Point to connect the system with the Internet network. OK OK OK ON = Turns on the Wi-Fi functionality. To proceed with the configuration move then to “Network configuration” OFF = “Wifi Network has been disabled” Log in to the App to start network configuration Serial Number OK The connectivity serial number is displayed here: XXXXXXXXX Re-configuration OK Would you like to proceed and recover the data back to factory settings? OK OK Connection to the local network accomplished. Configuration failed, please repeat the procedure. The display returns to the previous screen The display returns to the previous screen Press the programming key to select OFF or ON and press OK. WI-FI Signal Level OK Signal Level XX% Internet Time OK This functionality will update the time through the internet. Be sure to register the product in the right location! Press the programming key 0 OFF - 1 ON to select OFF or ON and press OK. Internet weather OK With internet weather your boiler will know the external temperature directly from internet and show the current forecasts in the app. Be sure to register the product in the right location! 0 OFF - 1 ON OK OK OK The display returns to the previous screen The display returns to the previous screen The display returns to the previous screen Press the programming key to select OFF or ON and press OK. User’s Manual / 19