Genus ONE+ WiFi User Manual

Ariston Genus ONE+ WiFi User Manual

USER’S MANUAL DISPLAY

USER’S MANUAL DISPLAY SETTINGS The main screen of the display can be customised. The main screen can be used to check the time, date, boiler operating mode, temperature settings or temperatures detected by the accessories, schedule programming. Press OK to access the display settings. Press the programming key and select: - Screen settings CH Settings DHW Settings Connectivity Settings Screen Settings Press the OK button. The “Screen settings” menu can be used to select the following parameters: - Language Press the OK button. Press the programming key and select the desired language. Press OK to confi rm the choice, and press the back button , to return to the previous screen. Press the programming key and select: - Date and time: - Press the OK button. - Press the programming key and select the date, - Press the OK button. - Press the programming key to select the exact day. - Press the OK button to confirm and move on to the month followed by the year, pressing the OK button to confirm after each step. - Press the programming key to select the time, - Press the OK button. - Press the programming key to select the exact hour - Press the OK button to confirm and move on to the minute value. - Press the OK button to confirm - Press the programming key to select summer time, - Press the OK button Date Time Legal hour Setting the date and time 26 / 10 / 2021 Save Tuesday 11 : 14 Auto Press OK to confi rm the choice, and press the ESC button , to return to the previous screen. ATTENTION! TIME AND DATE ARE RETRIEVED AUTOMATICALLY FROM INTERNET IN CASE THE PRODUCT IS CONNECTED. IF NOT, OR TO SET IT MANUALLY, IT IS NECESSARY TO ACCESS “CONNECTIVITY SETTINGS” AND SET THE INTERNET TIME FUNCTION TO OFF. Press the programming key to select: - Zone to be set by display to set the heating zone to show on the display Press the programming key to select: 1 Set zone 2 Set zone 3 Set zone Press the OK button to confirm your selection. Press the ESC button to return to the previous screen. Press the programming key to select: - Home screen when selecting the start screen settings, you can choose which information to display. Press the programming key to select: Boiler base Boiler complete Press the OK button to confirm your selection. Press the ESC button to return to the previous screen. Boiler base Boiler complete COMFORT 26/10/21 12:30 60° 1,5 bar 82° C. Heating Active 26/10/21 12:30 AUTO Press the programming key to select: - Automatic keylock Press the programming key to enable (ON) or disable (OFF) the keylock with the dispaly stand Press the OK button to confirm. Press the ESC button to return to the previous screen. Press the programming key to select: - Standby timing Press the programming key to select the timing to pass at stand-by after the last use (from 1 to 10 minutes or 24 hours) Press the OK button to confirm. Press the ESC button to return to the previous screen. Press the programming key to select: - Brightness in standby Press the programming key to adjust the brightness of the display during standby periods. Press the OK button to confirm. Press the ESC button to return to the previous screen. 10° 10° 20,5° 3 00 02 04 06 08 10 12 14 16 18 20 22 24 60° 1,5 bar 82° COMFORT AUTO C. Heating Active / 14 420011270801 - Rev.01 - 072024

USER’S MANUAL Press the programming key to select: - Home screen timing Press the programming key to set waiting time before the display come back to the home screen (from 1 to 15 minutes) Press the OK button to confi rm. Press the programming key to select: - Sound feedback volume Press the programming key to select the levelof sound feedback when you press the display button (from 1 to 10). Press the OK button to confirm. Press the back button to return to the previous screen. Press the programming key b to select: ➢ Time program service type Press the programming key b to select the type of time programming. Press the OK button to confirm. Press the back button to return to the previous screen. HEATING HOT WATER SETTING Access to the USER’S MENU Press the programming key to select: - Central Heating settings Press the OK button. CH Settings DHW Settings Connectivity Settings Screen Settings Selecting Heating settings To set the flow temperature, press the programming key and select: - Central heating Setpoint Temperature Press the OK button. The display screen shows: - Zone 1 set T - Zone 2 set T - active with Sensys connected - Zone 3 set T - active with Sensys connected Press the programming key to select: - Zone 1 set T Press the OK button. Press the programming key to set the flow temperature for the selected zone. Press the OK button to confirm. Repeat the above procedure to set the fl ow temperature for the other zones, if applicable. Press the ESC button . T set Z1 Set the flow temperature of zone 1 75°C Press OK to confirm Change heating hot water temperature NOTE If there is only one heating zone, the setting of the flow temperature is done by the keys 9 - see p. 7 User’s Manual / 15