Views
10 months ago

Genus ONE+ WiFi Installation Manual

  • Text
  • Wwwaristoncom
  • Manual
  • Wifi
  • Genus
  • Maintenance
  • Efficiency
  • Appliance
  • Flue
  • Installation
  • Heating
  • Boiler
Ariston Genus ONE+ WiFi Installation and Servicing Manual

MAINTENANCE GUIDE 3.12

MAINTENANCE GUIDE 3.12 Condensate trap Tools 3 TIME 5 min Disconnect the condensate discherge pipe from the bottom of the boiler. Unscrerw the two screws. 1 Disconnect the condensate pipe from the condensate trap 4 2 5 3 / 60 420011270900 - Rev. 04 - 072024

MAINTENANCE GUIDE 3.13 Safety valve 3.14 Temperature sensors Tools Tools TIME Drain the boiler (see 3.3). Disconnect the discharge pipe. Remove the fist clip on the left and pull the safety valve towards you 5 min NTC1 : Black NTC2: Red TIME 5 min NTC1 1 1 NTC2 2 Unplug the electrical connectors 2 Remove the clip and the temperature sensor IMPORTANT ! Do not use conducting paste for the contact sensors because it will alter the resistance value. TEMPERATURE RESISTANCE (kOhm) 0 27 10 17 20 12 25 10 30 8 40 5 50 4 Installation and servicing instructions / 61

Views
10 months ago

Genus ONE+ WiFi Installation Manual

  • Text
  • Wwwaristoncom
  • Manual
  • Wifi
  • Genus
  • Maintenance
  • Efficiency
  • Appliance
  • Flue
  • Installation
  • Heating
  • Boiler
Ariston Genus ONE+ WiFi Installation and Servicing Manual

MAINTENANCE GUIDE 3.12

MAINTENANCE GUIDE 3.12 Condensate trap Tools 3 TIME 5 min Disconnect the condensate discherge pipe from the bottom of the boiler. Unscrerw the two screws. 1 Disconnect the condensate pipe from the condensate trap 4 2 5 3 / 60 420011270900 - Rev. 04 - 072024

MAINTENANCE GUIDE 3.13 Safety valve 3.14 Temperature sensors Tools Tools TIME Drain the boiler (see 3.3). Disconnect the discharge pipe. Remove the fist clip on the left and pull the safety valve towards you 5 min NTC1 : Black NTC2: Red TIME 5 min NTC1 1 1 NTC2 2 Unplug the electrical connectors 2 Remove the clip and the temperature sensor IMPORTANT ! Do not use conducting paste for the contact sensors because it will alter the resistance value. TEMPERATURE RESISTANCE (kOhm) 0 27 10 17 20 12 25 10 30 8 40 5 50 4 Installation and servicing instructions / 61