Genus HE 35 Plus Manual

Ignition power output

Ignition power output setting1 This parameter limits the power of the boiler in the ignition phase. Possibility of adjusting ignition between maximum power (display of "99", i.e. 100%) and minimum power (display of "00", i.e. 0%). The percentage expresses the usable power value between the minimum and maximum power value. Use the and buttons in menu 1 to select the required value. The factory-set value is given in the menu table. F Maximum heating power regulation2 This parameter limits the power of the boiler in the heating phase. The percentage expresses the power value between the minimum and maximum power value. Use the and buttons in menu 2 to select the required value. The factory-set value is given in the menu table. F Anti-cycle timer3 This parameter sets the delay between 2 successive burner ignitions in heating mode. It is possible to select an ignition delay of between 1 and 7 minutes. Use the and buttons in menu 3 to select the required value. The factory-set value is given in the menu table. Minimum heating outlet temperature4 This parameter sets the minimum heating outlet temperature in relation to r. Use the and buttons in menu 4 to select the required value. The factory-set value is given in the menu table. Maximum heating outlet temperature5 This parameter sets the maximum heating outlet temperature in relation to r. Use the and buttons in menu 5 to select the required value. The factory-set value is given in the menu table. Selection of boiler typeF Pre-set in factory: This parameter must not be altered. 40

Selection of Secondary Output operationE Only activated if peripheral interface card connected (option) For connection of peripherals to the motherboard, refer to the user instructions for the Clima Manager or the external sensor. Parameter E is altered by the and programming buttons. 00 Zone valve - factory setting 01 NOT USED 02 NOT USED 03 NOT USED Circulation pump post-circulationP The appliance allows variation of the post-circulation period of the circulation pump after extinction of the burner. Adjustable from 1 to 15 minutes or continuous (CO). Use the and buttons in menu P to select the required value. The factory-set value is given in the menu table. Comfort Function : activation/deactivation of the Domestic hot water and tank reheating functionsC 00 Domestic hot water and tank reheating functions deactivated 01 Domestic hot water and tank reheating functions activated When the function is activated, the yellow indicator light 31 comes on. To deactivate the Comfort function, press the COMFORT button. The yellow indicator light 31 goes out. Use the and buttons in menu C to select the required value. The factory-set value is given in the menu table. Circulation pump speedP U0 - Fixed speed operation U1 - Variable speed operation Use the and buttons in menu P to select the required value. The factory-set value is given in the menu table. F Heating temperature range settingr 00 - possibility of adjusting the temperature from 25°C to x in menu 4 possibility of adjusting the temperature from x+1 to 75°C in menu 5 where x ≤ 44 °C 01 - possibility of adjusting the temperature from 42°C to y in menu 4 - possibility of adjusting the temperature from y+1 to 82°C in menu 5 where y ≤ 81 °C Use the and buttons in menu r to select the required value. The factory-set value is given in the menu table. F Temperature control by external sensorP (Only activated if the external sensor is installed) “90” Temperature adjustment by external sensor deactivated (external sensor not installed). “91” Temperature adjustment by external sensor activated (external sensor installed). Use the and buttons in menu P to select the required value. The factory-set value is given in the menu table. 41