AristonThermoUK
Views
2 years ago
Flag

Genus HE 35 Plus Manual

12. ELECTRICAL

12. ELECTRICAL CONNECTIONS C The 220-240 V and earth connection are made by using the lead provided C (Fig. 12.1) IMPORTANT!! CONNECTION SHOULD BE MADE VIA A 3 AMP FUSED DOU- BLE POLE ISOLATING SWITCH WITH CONTACT SEPERATION OF AT LEAST 3MM ON BOTH POLES. ALTERNATIVELY, A FUSED 3 AMP, 3 PIN PLUG AND UNSWITCHED SOCKET MAY BE USED, PROVIDED IT IS NOT USED IN A ROOM CONTAIN- ING A BATH OR SHOWER. IT SHOULD ONLY SUPPLY THE APPLIANCE. B THERMOSTAT AMBIANCE ROOM THERMOSTAT FIG. 12.1 External Controls Open the cover B with a screwdriver (Fig. 12.2) The room thermostat is connected onto this connector B (Fig. 12.1) - remove the bridge S (Fig. 12.3) - connect the thermostat in place of the bridge S (Fig. 12.3) - If a remote time clock is to be fitted, using a volt-free switching time clock, connect the wires from the time clock following the points above. (see also Fig. 12.4) Note: Before connecting an external time clock, disconnect the internal time clock as described in Section 18.3.4 (page 49) Room thermostat Connector B S Side view of the connection Raccordement to the pre côté cabled boîtier electrical électrique box pré-cablé FIG. 12.2 FIG. 12.3 30

Outside sensor N E N W E S H 05/2006 1/2 H 05/2006 05/2006 FIG. 12.4 31

INSTALLATION MANUALS

AristonThermoUK
Views
2 years ago
Flag

Genus HE 35 Plus Manual

12. ELECTRICAL

12. ELECTRICAL CONNECTIONS C The 220-240 V and earth connection are made by using the lead provided C (Fig. 12.1) IMPORTANT!! CONNECTION SHOULD BE MADE VIA A 3 AMP FUSED DOU- BLE POLE ISOLATING SWITCH WITH CONTACT SEPERATION OF AT LEAST 3MM ON BOTH POLES. ALTERNATIVELY, A FUSED 3 AMP, 3 PIN PLUG AND UNSWITCHED SOCKET MAY BE USED, PROVIDED IT IS NOT USED IN A ROOM CONTAIN- ING A BATH OR SHOWER. IT SHOULD ONLY SUPPLY THE APPLIANCE. B THERMOSTAT AMBIANCE ROOM THERMOSTAT FIG. 12.1 External Controls Open the cover B with a screwdriver (Fig. 12.2) The room thermostat is connected onto this connector B (Fig. 12.1) - remove the bridge S (Fig. 12.3) - connect the thermostat in place of the bridge S (Fig. 12.3) - If a remote time clock is to be fitted, using a volt-free switching time clock, connect the wires from the time clock following the points above. (see also Fig. 12.4) Note: Before connecting an external time clock, disconnect the internal time clock as described in Section 18.3.4 (page 49) Room thermostat Connector B S Side view of the connection Raccordement to the pre côté cabled boîtier electrical électrique box pré-cablé FIG. 12.2 FIG. 12.3 30

Outside sensor N E N W E S H 05/2006 1/2 H 05/2006 05/2006 FIG. 12.4 31

Search