Views
2 years ago

Clas ONE R - User Manual

  • Text
  • Boiler
  • Appliance
  • Ariston
  • Heating
  • Installation
  • Manual
  • Warranty
  • Display
  • Registered
  • External
  • Clas

USER’S MANUAL The

USER’S MANUAL The installation and first ignition of the boiler must be performed by qualified Gas Safe Registered engineer in compliance with Gas Safety (instillation & use) regulations and all other national regulations regarding installation, and in conformity with any requirements established by local authorities and public health organisations. After the boiler has been installed, the installer must ensure that the end user receives the declaration of conformity and the operating manual, and should provide all necessary information as to how the boiler and the safety devices should be handled. This appliance is designed to produce hot water for domestic use (combi version). It should be connected to a heating system and a distribution network for domestic hot water, both of which must be compatible with its performance and power levels. The use of the appliance for purposes other than those specified is strictly forbidden. The manufacturer cannot be held responsible for any damage caused by improper, incorrect and unreasonable use of the appliance or by the failure to comply with the instructions given in this manual. Installation, maintenance and all other interventions must be carried out in full conformity with the governing legal regulations and the instructions provided by the manufacturer. Incorrect installation can harm persons, animals and possessions; the manufacturing company shall not be held responsible for any damage caused as a result. In the event of any maintenance or other structural work in the immediate vicinity of the ducts or flue gas exhaust devices and their accessories, switch the appliance off by switching the external bipolar switch to the “OFF” position and shutting off the gas valve. When the work has been completed, ask a qualified technician to check the efficiency of the ducting and the devices. If the boiler should be out of use for a prolonged period, it is recommended that the electrical power supply be disconnected and that the external gas cock be closed. If low temperatures are expected, the boiler and system pipe work should be drained in order to prevent frost damage. Turn the boiler off and turn the external switch “OFF” to clean the exterior parts of the appliance. Do not allow children or inexperienced persons to use the appliance without supervision. Ariston is a licensed member of the Benchmark Scheme which aims to improve the standards of installation and commissioning of domestic heating and hot water systems in the UK and to encourage regular servicing to optimise safety, efficiency and performance. Benchmark is managed and promoted by the Heating and Hotwater Industry Council. For more information visit www.benchmark.org.uk. The Benchmark commissioning checklist, which can be found at the back of the installation instructions, must be completed in full by the installer and be left with the boiler or be made available upon request by any attending Ariston representative. CE labelling The CE mark guarantees that the appliance conforms to the following directives: - 2016/426/EU relating to gas appliances - 2014/30/EU relating to electromagnetic compatibility - 92/42/CEE relating to energy efficiency - 2014/35/EU relating to electrical safety - 2009/125/CE Energy related Products - 813/2013 Commission regulation (EU) 4 /

USER’S MANUAL CONTROL PANEL 1 2 3 4 5 6 7 8 Legend: 1. Display 2. Domestic Hot Water adjustment button +/- NOT ACTIVE (a) 3. MODE button (Operation mode selection summer/winter) 4. COMFORT button NOT ACTIVE 5. ON/OFF button 6. Auto button (To activate Thermoregulation) 7. RESET button 8 Heating temperature adjustument button +/- (b) (a) Pressing the buttons simultaneously allows access to the engineers menu and all parameters and settings (b) Use these buttons to modify and save the parameter settings DISPLAY Legend: Digits indicating: - boiler status - temperature indication with bar level - error code signals (ERROR) - Request press RESET button (boiler block) - menu settings Technical assistance request Flame detected with indication of power used Heating operation set Heating operation active Hot Water Comfort activated Boiler off with antifreeze function active Anti-frost Function Active AUTO AUTO function activated High efficiency operation (low C.H. flow temperature) Solar temperature probe connected - option Error signals The display shows the code External temperature displayed (with external sensor optional) Wi-Fi active (Kit Optional) / 5

MANUALS