Views
3 years ago

Aures Slim Multi - UK Manual

  • Text
  • Appliance
  • Electrical
  • Heating
  • Installation
  • Circuit
  • Heater
  • Outlet
  • Element
  • Inlet
  • Breaker
  • Aures
  • Slim
  • Manual

11. WARNING: UNIT MUST

11. WARNING: UNIT MUST BE PROPERLY GROUNDED 12. THIS HEATER MUST HAVE ITS OWN INDEPENDENT CIRCUIT USING A CORRECTLY RATED CIRCUIT BREAKER AND SUITABLE WIRE, SEE TABLE RECOMMENDED CABLE. OPERATING INSTRUCTIONS 1. Your new Instant Water Heater is flow activated. Regulate the knob in one of the 3 setting power (Low, Med, High) the product will switch ON and turn on the hot water tap. the heating element will work and warm the water only when there is a flow of water through the appliance.. You will need to allow at least 2.1 liters per minute to flow through the unit in order to activate the Instant Heating System. Run water through the heater for a few minutes. 2. Be sure to every so often clean the spray head of sediment to assure a smooth water flow. 3. Be sure to every so often clean the incoming water filter. 4. Be sure to install your Instant Water Heater in a heated location. The appliance cannot be installed in areas where the temperature may drop critically and there may be a risk that ice may form. 5. The user can adjust the hot water temperature regulating the setting power on the unit. the user can choose till 4 setting poer position: - Power - Heating element is off - Low - Only the 1st Heating element switches on. - Med - Only the 2nd heating element switches on. - High - 1st and 2nd heating elements switch on, working together. 6

INSTALLATION REQUIREMENTS A. A separate electrical line is required. B. The device must be connected to a separate circuit breaker. C. The recommended electrical cable for feeding the device, see table I (next page). INSTALLATION Device with 220-240V from 7kW up to 12kW & 400-415V 3 Phase For One Phase Short Circuit Together L1 Thermostat 85 Relay Heating Element Thermostat 85 L L2 Heating Element N L3 Thermostat 57 Relay Heating Element G Terminal Block N Terminal Block R.R Switch PCB Indicator 7

MANUALS