MAINTENANCE GUIDE 1. GENERAL ACCESS 1.0 Disconnect the boiler Before beginning maintenance work: a. Disconnect the appliance from the electricity supply. Press the ON/OFF button and wait 1 minute (the 3-way valve turn on Stand-by position) ATTENTION!! With the 3-way valve on heating position is not possible to remove the motor. Turn the external bipolar switch to the “OFF” position. b. Close the gas valve and the central heating and domestic hot water system valves. Remove the front panel 2 1 Lower the electrical front panel 1.1 General Access Tools Remove the two screws TIME 3 min 1 3 48 /
MAINTENANCE GUIDE 2. ELECTRICAL UNIT 2.1 Control box access Tools TIME 4 min Remove the front panel as above and pivot the electricl box 2.2 Fuse Tools Open the control box as above TIME 5 min 1 1 Remove the fuse Unhook the two clip and remove the cover 2 2 3 3 / 49
Loading...
Loading...
Loading...
CATALOGUE
PRODUCT BROCHURES
DATASHEETS
MANUALS
TECHNICAL BULLETINS
PLANNER MANUALS
ELCO Heating Solutions - Commercial Heating and Hot Water