Views
1 year ago

Andris Lux Eco - UK Manual

  • Text
  • Valve
  • Appliance
  • Discharge
  • Heater
  • Electrical
  • Tundish
  • Fitted
  • Thermal
  • Circulation
  • Heating
  • Andris
  • Manual

Symbols: Symbol !

Symbols: Symbol ! Meaning Failure to observe this warning can result in injury, which may even be fatal in certain circumstances Failure to observe this warning can result in damage or injury, even serious in certain circumstances, to property, plants and animals ! Observe the product's general and specific safety instructions. GENERAL SAFETY STANDARDS Ref. Warning Risk Symbol 1 Do not open the appliance or remove from its installation Electrocution hazard due to the presence of live electrical equipment Personal injury - burns caused by overheated components and wounds caused by sharp edges ! 2 Do not start or stop the appliance by inserting/pulling the power plug Electrocution hazard due to damage to the power cord, its plug or the socket ! 3 Do not damage the power cord Electrocution hazard due to bare live wires ! 4 Do not leave objects on the appliance Personal injury due to objects falling off the appliance as a result of vibration Damage to the appliance or other property due to objects falling off the appliance as a result of vibration ! 5 Do not climb onto the appliance Personal injury due to falling off the appliance Damage to the appliance or other property due to the appliance itself detaching from its mounting ! 6 Do not clean the appliance without having first switched it off, pulled its power plug or shut off its power switch Electrocution hazard due to the presence of live electrical equipment ! 7 Install the appliance to a solid wall which is not subject to vibration Danger of the appliance falling off the wall due to structural collapse, or noisy operation ! 8 Make the electrical hookup with cables of adequate cross-section Danger of fire due to overheating of undersized electrical wires ! 9 Restore all safety and control functions after working on the appliance and check that they are operational before returning it to service Damage or blocking of the appliance due to improper control ! 10 Drain all components containing hot water, using the bleed cocks, before handling them Danger of burns ! 11 Descale the system as given in the product's “safety sheet”; when doing so, ventilate the room, wear safety clothing, make sure not to mix products, and protect the appliance itself and any adjacent objects Personal injury due to contact of the skin and eyes with acid, inhalation or ingestion of noxious chemicals Damage to the appliance and adjacent objects due to corrosion by acid ! 12 Do not use insecticides, solvents or aggressive detergents to clean the appliance Damage to plastic and painted parts and assemblies 6

Anti-legionella recommendations (European standard CEN/TR 16355) Information Legionella is a small bacterium, of stick-like form, and is found naturally in fresh water. Legionnaire's disease is a serious pulmonary infection caused by inhalation of the Legionella pneumophilia bacterium and other species of Legionella. The bacterium is frequently to be found in the plumbing of houses, hotels and water used in A/C and air cooling systems. The most effective measure against infection is to prevent the bacterium proliferating in water circuits. European standard CEN/TR 16355 provides guidelines for preventing the proliferation of Legionella in drinking water systems, without substituting applicable local legislation. General recommendations “Conditions favourable to the proliferation of Legionella”. The following conditions are favourable to the proliferation of Legionella: • Water temperature in the range 25 - 50 °C. To reduce the proliferation of Legionella, the water temperature be kept with these limits to prevent them growing or reduce their growth to a minimum. If this is not possible, the drinking water system must be sanitised thermally; • Stagnant water. To prevent water stagnating for a long time, the drinking water system must be flushed or made to run abundantly at least once a week; • Nutrients, biofilms and sediment in the circuit, including boilers, etc. Sediment may promote the proliferation of Legionella and should be regularly eliminated from water storage devices, boilers and expansion/holding tanks (for instance, once a year). As regards storage heater like the present, if: 1) the appliance is switched off for several months at a time or 2) the water temperature is kept constant in the range 25 - 50°C, the Legionella bacterium may grow inside the tank. If such circumstances, to reduce the proliferation of the bacterium, one must run a thermal sanitisation cycle. This cycle is suited to use in domestic hot water systems and complies with the guidelines for the prevention of Legionella given in Table 2 of standard CEN/TR 16355 (see below). Ref. in Enclosure C Temperature Stagnation Sediment Separate hot and cold water No storage No circulation of hot water C.1 - - - Circulation of hot water Table 2 - Types of hot water system No circulation of mixed water Storage Circulation of mixed water No storage upline of the mixer valves No circulation of mixed water Mixed hot and cold water Circulation of mixed water C.2 ≥ 50 °C e C.3 in C.4 ≥ 50 °C e C.5 thermal C.6 thermal storage disinfection d disinfection d heater a ≤ 3 l b - ≤ 3 l b - - remove c remove c - ≤ 3 l b - Storage upline of the mixer valves No circulation of mixed water C.7 in storage heater a - remove c Circulation of mixed water C.8 ≥ 50 °C e thermal disinfection d ≤ 3 l b remove c No storage upline of the mixer valves No circulation of mixed water C.9 Circulation of mixed water thermal thermal disinfection d disinfection d - - C.10 ≤ 3 l b a Temperature ≥ 55°C all day or at least 1h a day ≥60°C. b Volume of water contained in the pipes between the circulation system and the most distant tap. c Remove the sediment from the storage heater as required by local conditions, but no less frequently than once a year. d Thermal disinfection for 20 minutes at 60°C, for 10 minutes at 65°C or 5 minutes at 70 °C at all delivery points at least once a week. e The water temperature in the circulation circuit may not fall below 50°C. - Not required - This storage water heater is sold with a thermal disinfection cycle function not enabled for default; as a consequence, if, for any reason, one of the above said “Conditions for Legionella growth” could occur; it’s hardly recommended to enable such function rotating the knob up to maximum water temperature (>60°C). However, the thermal disinfection cycle does not kill all Legionella bacteria in the storage tank. It follows that if the water temperature setting is less than 55°C, the Legionella bacterium infection may reoccur. Caution: the water temperature in the tank can cause immediate serious burns. Children, disabled persons and the aged are particularly at risk of burns. Check the water temperature before taking a bath or shower. 7