Alteas ONE+ User Manual

Ariston Alteas ONE+ User Manual

USER’S MANUAL HEATING

USER’S MANUAL HEATING SCHEDULE PROGRAMMING THE TIME PROGRAMMING IS SET FROM THE FACTORY TO THE EXTENDED “MULTILEVEL” TIME PROGRAMMING. However, it is possible to select between: ➢ Extended Time Program “Multilevel setpoint”: in daily multi-level time scheduling, available only on specially configured products, it is possible to define up to 12 daily slots, each of which can be associated with a specific setpoint temperature ➢Time Program “Two levels setpoint”:the daily 2-level time scheduling allows for dividing the schedule into a maximum of 4 comfort slots and 4 reduced-temperature slots within the 24 hours of each day. It is possible to define a temperature set-point for the comfort slot and one for the reduced-temperature slot. Press OK to set heating schedule programming. Press the programming key to select: - Central Heating settings Press the OK button. The display screen shows: - Set heating temperature - Time program - Holiday function - Termoregulation Press the programming key to select: - Time program Press the OK button. The display screen shows: - Free Time programming - Wizard time programming - Preset programs - Time program/manual mode Press the programming key to select: - FREE TIME PROGRAMMING Press the OK button. The display screen shows: - All zones - Zone 1 - Zone 2 - Zone 3 Press the programming key to select the zone in which you wish to apply schedule programming: Press the OK button. Press the programming key to select Save. Press the OK button and the programming key b set the start of the heating period corresponding to the flashing value. Press the OK button to confirm. Press the OK button and the programming key b to set the temperature of the period. If you want to add new time periods, press the programming key b and select Add period, press the OK button. Repeat the above procedure to set the start and end times for each period added. Once programming is complete, press the programming key b and select Save. Comfort days time programming Start 00:00 Temp 15:00 Start Start 07:00 Temp 09:00 Temp 20:00 15:00 Start 17:00 Temp 20:00 Add period Save 00 02 04 06 08 10 12 14 16 18 20 22 24 Setting comfort periods heating schedule programming Press the OK button to confirm. Press the programming key to select: - Days remaining if there are any days which have not yet been programmed, then repeat the steps described above. Press the programming key to select: - Modify to change any previously programmed periods Press the programming key to select: - Exit to exit schedule programming. Press the OK button to confirm. The display reverts to showing the previous screen. Press the ESC button to return to the main screen. Press the programming key to select: - Set time program Press the OK button. Press the programming key to select the day or days of the week you wish to program. Every time a day is selected, press the OK button to confirm. The days selected for programming appear on the display in a box. Select days with the same time program 00 02 04 06 08 10 12 14 16 18 20 22 24 Su Mo Tu We Th Fr Sa Save Selecting days heating schedule programming / 16 420011270801 - Rev.01 - 072024

USER’S MANUAL GUIDED PROGRAMMING To facilitate schedule programming procedures, configuration can be carried out via: - Wizard time programming - Pre-set programs Press the programming key to select: - WIZARD TIME PROGRAMMING Press the OK button. Press the programming key to select the zone in which you wish to apply schedule programming. Press the OK button. Press the programming key to select: - Set time program Press the OK button. Now follow the step-by-step instructions which appear on the display from time to time. - PRESET PROGRAMS Press the OK button. Press the programming key to select the zone in which you wish to apply schedule programming. Press the OK button Press the programming key to select: - Set programming Press the OK button. Press the programming key to select among the following: - Family program - No lunch program - Midday program - Always Active Press the OK button to confirm. Press the programming key to scroll through the days and the heating program start and end time. Press the programming key to select save, then press the OK button. Press the ESC button to return to the previous screen. Family program No lunch program Midday program Always active Selecting half-day program - TIME PROGRAM/MANUAL MODE (this mode can be used to select either programmed or manual zone heating management) Press the OK button. Press the programming key to select the zone to which you wish to apply the setting. All zones Zone 1 Zone 2 Zone 3 Selecting operating mode for zone 2 Select scheduled or manual programming. Press the OK button. Press the ESC button to return to the previous screen. Time Programn Mode Setting MANUAL HEATING MODE Manual mode disables heating schedule programming. Manual operation allows the heating to be kept on constantly. To select manual boiler operation, press the OK button to access the Menu. Press the programming key to select: - Time Program Press the OK button. Press the programming key Manual to select: Selecting mode manual - Manual Press the programming key to select Manual mode and press the OK button. Press the OK button again to save these settings. The display reverts to showing the previous screen. Press the back button until the main screen reappears. User’s Manual / 17