Views
3 years ago

Alteas ONE Net - User Manual

  • Text
  • Programming
  • Boiler
  • Heating
  • Display
  • Settings
  • Manual
  • Appliance
  • Ariston
  • Active
  • Auto
  • Alteas

USER’S MANUAL USER’S

USER’S MANUAL USER’S MENU STRUCTURE CH Settings CH Setpoint Temperature Time program Holiday function AUTO function T set Z1 T set Z2 T set Z3 Free Time Programming Wizard time programming Preset programs Time program/manual mode The system will remain in antifreeze mode until midnight of the date set. Set of the best operation mode according to the type of installation. DHW Settings DHW comfort Setpoint Temperature Time program (NOT ACTIVE) Comfort function Set the domestic hot water temperature Disabled - Funzione Comfort disattivata Time Based - Comfort function set to: Time Based. The Boiler will be ignited to quickly provide Hot Water for 30 minutes after the last tapping. Always Active - Comfort function set to: Always Active. The Boiler will be ignited to quickly provide Hot Water all day long. Connectivity Settings - see page 18 ON/OFF Wi-Fi Network Network configuration Serial Number Reset to factory settings Signal Level Internet Time If you enable this functionality, the date and time will be requested at the Internet Time Service. Screen Settings Language Time & Date see page 12 Selected language: English Zone to be set by display Select heating zone - from1 to 3 Home screen Automatic keylock Stand-by timing Brightness in standby Boiler base Boiler complete The keylock will be activated together with the display stand-by Select the timing to pass at stand-by after the last use( from 1 to 10 minutes or 2 hours) Select Contrast level of screen Press the Programming Keys b to select: - + Home screen timing Sound feedback volume Select waiting time before you see the home screen (from 1 to 15 minutes) Select the level of sound feedback when you press the display buttons (from 1 to 10) 12 /

USER’S MANUAL DISPLAY SETTINGS The main screen of the display can be customised. The main screen can be used to check the time, date, boiler operating mode, temperature settings or temperatures detected by the accessories, schedule programming. Press OK to access the display settings. Press the programming key and select: - Screen settings CH Settings DHW Settings Connectivity Settings Screen Settings Press the OK button. The “Screen settings” menu can be used to select the following parameters: - Language Press the OK button. Press the programming key and select the desired language. Press OK to confi rm the choice, and press the back button , to return to the previous screen. Press the programming key and select: - Date and time: - Press the OK button. - Press the programming key and select the date, - Press the OK button. - Press the programming key to select the exact day. - Press the OK button to confirm and move on to the month followed by the year, pressing the OK button to confirm after each step. - Press the programming key to select the time, - Press the OK button. - Press the programming key to select the exact hour - Press the OK button to confirm and move on to the minute value. - Press the OK button to confirm - Press the programming key to select summer time, - Press the OK button Press the programming key to select: - Zone to be set by display to set the heating zone to show on the display Press the programming key to select: 1 Set zone 2 Set zone 3 Set zone Press the OK button to confirm your selection. Press the ESC button to return to the previous screen. Press the programming key to select: - Home screen when selecting the start screen settings, you can choose which information to display. Press the programming key to select: Boiler base Boiler complete Press the OK button to confirm your selection. Press the ESC button to return to the previous screen. Boiler base Boiler complete COMFORT 26/10/15 12:30 60° 1,5 bar 82° C. Heating Active 26/10/15 12:30 AUTO 10° 10° 20,5° 3 00 02 04 06 08 10 12 14 16 18 20 22 24 60° 1,5 bar 82° COMFORT AUTO C. Heating Active Press the programming key to select: - Automatic keylock Press the programming key to enable (ON) or disable (OFF) the keylock with the dispaly stand Press the OK button to confirm. Press the ESC button to return to the previous screen. Date Time Legal hour 20 / 11 / 2015 Friday 11 : 14 Auto Save Press the programming key to select: - Standby timing Press the programming key to select the timing to pass at stand-by after the last use (from 1 to 10 minutes or 24 hours) Press the OK button to confirm. Press the ESC button to return to the previous screen. Setting the date and time Press OK to confi rm the choice, and press the ESC button , to return to the previous screen. Press the programming key to select: - Brightness in standby Press the programming key to adjust the brightness of the display during standby periods. Press the OK button to confirm. Press the ESC button to return to the previous screen. / 13

MANUALS